Update: 04 July 2017
Control4 climate control solution relied on CCZ-T1-W wireless thermostat and was limited to the limitations of it which is basically heat pumps, radiant heating systems etc. This solution is unfortunately not adequate especially for HVAC system controls. With this HVAC system solution driver set you will be able to control most of the HVAC devices available on market.
Using the CoolMaster or PI485 gateway you may control multiple indoor units, even using CCZ-T1-W, and by connecting it through Ethernet you may do multi controller installations like hotels and apartment buildings. This driver set is able to control the under floor heating in conjunction with the HVAC unit or in standalone mode.
- Widest range of support for Air Conditioning support for Control4 Systems
- Supports Control4 Thermostat (CCZ-T1-W) and now working with Aprilaire thermostat too
- Works even if there is no thermometer.
- Can read temperature from Card Access modules.
- Controls all HVAC functionality (HVAC modes, set points, fan modes) from Control4 interfaces.
- Swing mode supported through programming interface.
- Celsius and Fahrenheit systems are supported.
- Allows web control of heating/cooling via 4Sight.
- Compatible with Control4 OS 1.7.3 and above.
- Unified (or standalone) relay control for under floor heating (no programming needed).
- PC tool available for creating the suitable set of drivers and extending IR support.
- Trial mode available.
- Scheduling is supported.